Prices
Training programmes are available designed to enhance your skills/knowledge. Programmes are held on a regular basis - Monday to Friday.
- Ground Source and Air Source Heat Pumps
- Basic Gas Utilisation
- Commercial Natural Gas Safety
- Domestic Natural Gas Safety
- Energy Efficiency for Domestic Heating
- LPG
- Oil (OFTEC oil training courses)
- Unvented Domestic Hot Water Storage Systems
- Part P Electrical Scheme
- Solar Thermal
- Water Regulations
- F-Gas
- Wind Turbines
- Heat Pumps
Tailored training can also be designed/delivered
for groups of individuals. Examples include;
- Basic Plumbing
- Gas Safety Awareness for Supervisors/Managers
- Legionella Awareness
- Portable Appliance Testing Training
Please contact us on 01603 622001 or email us at info@chsl.org.uk to discuss your requirements further.
Price list as from August 2009 - all prices shown are subject to VAT and
certification fees (where applicable)
DOMESTIC CATEGORIES
Table 1
| Description |
Cost of Training/Assessment |
Duration of Training |
| Basic Gas Utilisation (Domestic) Course (incorporates CCN1/CPA1 training/assessment together with
CEN/WAT element plus Energy Efficiency for Domestic Heating)
|
£280.00 per module 8 modules
|
Modules are emailed or sent in the post. 15 days on site training with a gas safe engineer.
|
Table 2
CODE
|
Description
|
Cost of Training |
Duration of Training |
Cost of Assessment |
Duration of Assessment |
CCN1
|
Core Domestic Natural Gas Safety
|
£315.00 |
3 days |
£395.00 |
2 days |
CCN1R
|
Core Domestic Natural Gas Safety Refresher
|
£225.00
|
2 days
|
£395.00
|
2 days |
CEN/WAT
|
Central Heating Boilers/Instantaneous Water Heaters |
£100.00
|
½ day |
£180.00
|
1 day |
HTR1
|
Fire and Wall Heaters
|
£100.00
|
½ day
|
£180.00
|
½ day |
CKR1
|
Cookers
|
£100.00
|
½ day
|
£180.00
|
½ day |
DAH1
|
Ducted Air Heaters
|
£100.00
|
½ day
|
£180.00
|
½ day |
CPA1
|
Combustion Analysis & Performance
|
£100.00
|
½ day
|
£100.00
|
½ day |
| Code |
Description |
Cost of Assessment |
Duration of Assessment |
| |
Elements Renewals |
£55.00 |
Runs alongside with CCN1R |
CENWAT Renewal |
Central Heating Boilers/Instantaneous Water Heaters |
£110.00 |
|
You may only renew the elements which you have previously taken under the ACS scheme. Any additional elements you wish to take for the first
time, must be applied for as shown in Table 2
LPG
CATEGORIES - Training & Assessment
CODE
|
Description
|
Cost of Training |
Duration of Training |
Cost of Assessment |
Duration of Assessment |
CoNGLP1 & PD
|
Natural Gas to LPG Fuel Changeover & Permanent Dwellings |
£120.00
|
1 day |
£180.00 |
1 day |
| CCLP1/Boats |
Core LPG with
boats and one element, i.e. cookers |
£300.00 |
3
days |
£380.00 |
2
days |
RPH
|
Residential Park Homes
|
£35.00
|
|
£35.00
|
|
LAV
|
Leisure Accommodation Vehicles
|
£35.00
|
|
£35.00
|
|
B
|
Boats
|
£100.00
|
½ day
|
£180.00
|
½ day |
REFLP2
|
Caravan Gas Refrigerators
|
£100.00
|
½ day
|
£180.00
|
½ day |
HTRLP2
|
Fires & Wall Heaters
|
£100.00
|
½ day
|
£180.00
|
½ day |
CABLP1
|
Cabinet Heaters
|
|
|
£95.00
|
1 day |
VESLP1
|
Vessel Pipework
|
£100.00
|
½ day
|
£100.00
|
½ day |
VESLP2
|
Vessel Pipework
|
£100.00
|
½ day
|
£100.00
|
½ day |
EFJLP1
|
Electrofusion Welding
|
£150.00
|
½ day
|
|
|
CoNGLP1CMC
|
LPG to Mobile Catering Safety
|
£100.00
|
½ day
|
|
|
| CCLP1/EP |
CCLP1/EP |
£100.00 |
½ day |
£200
|
|
OIL CATEGORIES - Training & Assessment
|
OFT 101
|
Domestic/Light Commercial Oil Firing Commissioning & Servicing - Pressure Jet Appliances
|
£315.00
|
3 ½ days
|
|
OFT 105E
|
Domestic/Light Commercial Oil Firing System Installation
|
£285.00
|
3 ½ days
|
|
OFT 600A
|
Domestic/Light Commercial Oil Tank Installation
|
£245.00
|
2 days
|
| |
OFT 101
and
OFT 105E
|
Domestic/Light Commercial Oil Firing Commissioning & Servicing
- Pressure Jet Appliances
Domestic/Light Commercial Oil
Firing System Installation |
£485.00 |
3 day package |
| |
OFT 101
and
OFT 105E
and
OFT 600A
|
Domestic/Light Commercial Oil Firing Commissioning & Servicing
- Pressure Jet Appliances
Domestic/Light Commercial Oil Firing System Installation
Domestic/Light Commercial Oil Tank
Installation
|
£585.00 |
3½ day
package |
Solar Thermal Training and Assessment
|
Solar Thermal
|
Must already hold Unvented certificate. (£130 if done alongside Solar)
|
£385
|
2 days
|
|
Solar PV
|
Solar Photovoltaic – Installations up to 5KWP output Systems – Price (Inc Cert Fee)
|
£495
|
3 days
|
| GSHP |
Ground/Air Source Heat Pumps
|
£450.00
|
3 day t/a
|
Plumbing Category - Training and Assessment
UDHWSS
|
Unvented Domestic Hot Water Storage systems
|
£175.00 |
1 day
|
ELECTRICAL - Training & Assessment
| Part P
Electrical Scheme - Level B |
£600.00 |
4
days |
ENERGY
EFFICIENCY - Training & Assessment
| Energy
Efficiency For Domestic Heating |
£120.00 |
1
day |
WATER REGULATIONS - Training & Assessment
Water Regs
|
BPEC/WRAS
Water
Regulations
|
£220.00 |
1
day |
COMMERCIAL
CATEGORIES
CODE
|
Description
|
Cost of Training |
Duration of Training |
Cost of Assessment |
Duration of Assessment |
COCN1
|
Core Commercial Gas Safety
|
£305.00 |
3 days |
£390.00 |
2 days |
|
CoDNCO1
|
Changeover Domestic Natural Gas to Commercial Natural Gas
|
£205.00
|
2 days
|
£290.00
|
1 day |
|
CIGA1
CORT1
CDGA1
Inc (ICAE1)
|
Commission, Service Repair & Breakdown of Commercial Indirect
Fired Heating Appliances & Equipment
Commission, Service, Repair & Breakdown of Overhead Radiant
Tube / Radiant Plaque Heaters
Commission, Service Repair & Breakdown of Commercial Direct
Fired Heating Appliances & Equipment
Installation First Fix of
Commercial Appliances & Equipment
|
£100.00
|
1 day
|
£285.00
|
1 day |
|
TPCP1
|
Tightness testing & purging of installation pipework exceeding 1m³ in volume, up to 16 bar operating pressure(natural gas) & 2 bar operating pressure for LPG
|
£130.00
|
1½ day
|
£250.00
|
1½ day |
|
TPCP1A
|
Tightness testing and direct purging of installation pipework not exceeding 1m³ in volume, 40 mbar pressure and 150mm diameter natural gas only
|
£130.00
|
1 day
|
£175.00
|
1 day |
|
ICPN1 |
Installation of Commercial
Pipework |
£100.00 |
½ day |
£130.00 |
½ day |
CCLNG 1 CLE1 |
Commercial Laundry Safety Commercial Laundry Appliance |
£100.00 |
1 day |
£220.00 |
1
day |
| CMET1 |
LP Diaphragm & RPD Meters |
£100.00 |
½ day |
£180.00 |
½ day |
| CMET2 |
HP Meters |
£100.00 |
½ day |
£180.00 |
½ day |
COMMERCIAL CATERING
CATEGORIES
CODE
|
Description
|
Cost of Training |
Duration of Training |
Cost of Assessment |
Duration of Assessment |
CCCN1
|
Core Commercial Catering Gas
Safety |
£305.00 |
3 days |
£390.00 |
2 days |
|
CoDC1
|
Changeover Core Domestic to Commercial Catering |
£205.00
|
2 days
|
£290.00
|
1 day |
|
COMCAT 1, 2 & 3
|
Boiling Burners (Ranges, Ovens) Water Boilers (Pressure or
Expansion Type, Pressure Steamers) Fryers & Grills
|
£100.00
|
1 day
|
£235.00
|
1
day |
Other Programmes
| Gas
Safety Awareness For Managers/Supervisors |
£200.00 |
1 day |
| Legionella Awareness
|
£200.00 |
1
day |
REFRIGERATION
CODE
|
Description
|
Cost of Training |
Duration of Training |
Cost of Assessment |
Duration of Assessment |
2079-11 City and Guilds Level 2 Award in F-Gas and
ODS Regulations:Category 1 (Full Course)
|
This course is designed for engineers who have limited experience of working within the refrigeration industry who would like to further their skills/knowledge. Brazing is part of the final assessment therefore it is a necessity for delegates to be familiar with, as there will no in depth training.
|
£895.00 (incl. cert fee) |
5 days |
|
|
2079-11 City and Guilds Level 2 Award in F-Gas and
ODS Regulations:Category 1 (Full Course)
|
This course is designed for engineers who have limited experience of working within the refrigeration industry who would like to further their skills/knowledge. Brazing is part of the final assessment therefore it is a necessity for delegates to be familiar with, as there will no in depth training.
|
£550.00 (incl. cert fee) |
3 days |
|
|
CITB J11
|
J11 - Safe handling of refrigerants (Cat 1) Leakage, recovery,install, maintain and service on all installations. (Training manual incl in price)
|
£895.00 (incl. cert fee) |
5 days |
|
|
CITB J12
|
J12 - Safe handling of refrigerants (Cat 2) Leak check,install, maintain and service >3kg < 6kg (Training manual incl in price)
|
£550.00 (incl. cert fee) |
3 days |
|
|
|
CITB J04/J05
|
Pipework & Brazing J04/J05 |
£150.00
|
1½ days
|
£296.00
|
1½ days |
For Certification Fees prices please
call 01603 622001.
The Certification Fees are in
addition to the prices quoted above.
All
training and assessment prices are subject to VAT @ current rate.
Re-Assessments:
The cost of re-assessment for any
category is £95.00 per half day.
Payments:
Payment must be made either by
cash/cheque/credit card. Bookings made at short notice must be paid for at
the time of booking.
If payment has not been received by
the training or assessment date then the candidate will not be allowed to
participate.
Cancellation / Postponement :
If the applicant is unable to attend
on the agreed dates he/she must inform the centre in writing (post/fax at
least 14 days before the assessment. This will allow the applicant to
change his/her booking to an agreed alternative.
CHSL retains the right to move or
postpone any missed training or assessment to any date convenient to the
Centre's Administration. Should the applicant be unable to attend for
medical reasons, which occur during the 14 days prior to the assessment,
CHSL will allow the applicant to re-book an alternative date as agreed by
CHSL. Applicants are required to provide proof of a Private Medical
Certificate to authenticate the reason for non-attendance.
Expiry:
All gas and oil assessment
qualifications are valid for five years.
Certification and
Registration:
Successful candidates are issued with
certificates from Logic Certification or NIC Certification (as
appropriate) - approximately 8 weeks from date of assessment (unless
additional elements are to follow).
Individuals can opt for a fast-track
certification service at an additional cost - enabling the
certification paperwork to be processed within 5 working days. Due to the
additional administration, individuals must request this service prior to
the completion of their assessment.
Logic Cerification will notify CORGI
of the operatives competence but it is the individual's own responsibility
to register with CORGI. Completion of the ACS assessments does not
guarantee CORGI registration.
Assessments:
Assessments are divided into
theoretical and practical sections. Reference books supplied may be
referred to during the theory open book sections. Manufacturer's
instructions are provided to assist with the practical elements. Partial
re-assessments of the areas in which the candidate has been found to be
Not Yet Competent must be taken within 90 days of the date of the initial
assessment.
For the duration of the 90 days, the
other areas in which competence has been proven will remain valid. Proving
competence by re-assessment in the remaining areas will result in the
candidate being recommended for certification.
|